- scrc.us.com
- Compare
- A6 vs V2.4
JGAURORA A6 vs Voron V2.4
What A6 does better (3) and where V2.4 wins (4) — every spec side by side.
Why is A6 better than V2.4?
- Finest layer height0.05 mm vs 0.1 mm2×
- Delivered asFully assembled vs Kit
- Build width (X)300 mm vs 250 mm+20%
Why is V2.4 better than A6?
- Build volume12 L vs 15.6 L+30%
- Build height (Z)200 mm vs 250 mm+25%
- Max bed temperature110 °C vs 120 °C+9%
- Build depth (Y)200 mm vs 250 mm+25%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | Fully assembled | Kit |
| All-metal frame | — | Yes |
| Klipper firmware | — | Yes |
| Open-source design | — | Yes |
| Build volume | ||
| Build width (X) | 300 mm | 250 mm |
| Build depth (Y) | 200 mm | 250 mm |
| Build height (Z) | 200 mm | 250 mm |
| Build volume | 12 L | 15.6 L |
| Speed | ||
| Max print speed | — | 250 mm/s |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.1 mm |
| Thickest layer height | 0.3 mm | 0.4 mm |
| Extruder & hotend | ||
| Max nozzle temperature | 250 °C | — |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.4 mm | — |
| Toolheads | — | 1 |
| Nozzles | — | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, TPU | — |
| Number of supported materials | 3 | — |
| Engineering materials (PA, PC, CF) | No | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 120 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | Yes |
| Connectivity & control | ||
| Connectivity | USB, SD card | USB, SD card |
| Wi-Fi | — | No |
| Ethernet | — | No |
| USB | Yes | Yes |
| SD card | Yes | Yes |
| Bluetooth | — | No |
| Screen size | 4.3″ | — |
| Touchscreen | Yes | Yes |
| Features | ||
| Silent stepper drivers | — | Yes |
| Size & power | ||
| Width | 520 mm | — |
| Depth | 405 mm | — |
| Height | 472 mm | — |
| Weight | 21 kg | — |
