- scrc.us.com
- Compare
- Super Racer SR vs Aquila D1
FLSUN Super Racer SR vs Voxelab Aquila D1
What Super Racer SR does better (7) and where Aquila D1 wins (4) — every spec side by side.
vs
5.3Speed4.6
5.5Print quality2.6
2.6Material versatility7.0
7.2Build volume5.6
3.0Ease of use5.0
Dimensions
Size comparison
Super Racer SRAquila D1
| Super Racer SR | Aquila D1 | Difference | |
|---|---|---|---|
| Height | 960 mm | 551 mm | +409 mm |
| Width | 440 mm | 470 mm | −30 mm |
| Depth | 390 mm | 440 mm | −50 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Super Racer SR better than Aquila D1?
- Build volume17.5 L vs 13.8 L+27%
- Finest layer height0.05 mm vs 0.1 mm2×
- Max print speed200 mm/s vs 180 mm/s+11%
- Build height (Z)330 mm vs 250 mm+32%
- Delivered asPartially assembled vs Kit
- Build width (X)260 mm vs 235 mm+11%
- Build depth (Y)260 mm vs 235 mm+11%
Why is Aquila D1 better than Super Racer SR?
- Max nozzle temperature260 °C vs 300 °C+15%
- Max bed temperature100 °C vs 110 °C+10%
- Number of supported materials4 vs 5+25%
- Screen size3.5″ vs 4.3″+23%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | Delta | Bed-slinger (i3-style) |
| Delivered as | Partially assembled | Kit |
| All-metal frame | Yes | Yes |
| Build volume | ||
| Build width (X) | 260 mm | 235 mm |
| Build depth (Y) | 260 mm | 235 mm |
| Build height (Z) | 330 mm | 250 mm |
| Build volume | 17.5 L | 13.8 L |
| Speed | ||
| Max print speed | 200 mm/s | 180 mm/s |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.1 mm |
| Thickest layer height | 0.3 mm | 0.4 mm |
| Automatic bed levelling | Yes | — |
| Extruder & hotend | ||
| Max nozzle temperature | 260 °C | 300 °C |
| Direct-drive extruder | No | No |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzle material | brass | brass |
| Swappable nozzle / hotend | — | Yes |
| Toolheads | 1 | 1 |
| Nozzles | 1 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, PETG, PLA, Wood | ABS, HIPS, PETG, PLA, TPU |
| Number of supported materials | 4 | 5 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 110 °C |
| Connectivity & control | ||
| Connectivity | USB, SD card | USB, SD card |
| USB | Yes | Yes |
| SD card | Yes | Yes |
| Screen size | 3.5″ | 4.3″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | No | — |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Silent stepper drivers | Yes | — |
| Size & power | ||
| Width | 440 mm | 470 mm |
| Depth | 390 mm | 440 mm |
| Height | 960 mm | 551 mm |
| Weight | — | 9 kg |
| Rated power | 300 W | 350 W |
