- scrc.us.com
- Compare
- Creator 3 vs i3 MK3S
Flashforge Creator 3 vs Prusa i3 MK3S
What Creator 3 does better (5) and where i3 MK3S wins (2) — every spec side by side.
Dimensions
Size comparison
Creator 3i3 MK3S
| Creator 3 | i3 MK3S | Difference | |
|---|---|---|---|
| Height | 615 mm | 500 mm | +115 mm |
| Width | 627 mm | 550 mm | +77 mm |
| Depth | 485 mm | 400 mm | +85 mm |
| Weight | 40 kg | 11 kg | +29 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Creator 3 better than i3 MK3S?
- Build volume15 L vs 11 L+36%
- Wi-FiYes · i3 MK3S: No
- EthernetYes · i3 MK3S: No
- Build width (X)300 mm vs 250 mm+20%
- Build depth (Y)250 mm vs 210 mm+19%
Why is i3 MK3S better than Creator 3?
- Weight40 kg vs 11 kg3.6×
- Build height (Z)200 mm vs 210 mm+5%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | — | Kit |
| Build volume | ||
| Build width (X) | 300 mm | 250 mm |
| Build depth (Y) | 250 mm | 210 mm |
| Build height (Z) | 200 mm | 210 mm |
| Build volume | 15 L | 11 L |
| Speed | ||
| Max print speed | 100 mm/s | — |
| Print quality | ||
| Finest layer height | 0.05 mm | — |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, PVA, PETG, HIPS, PA, PC, PA-CF | — |
| Number of supported materials | 8 | — |
| Engineering materials (PA, PC, CF) | Yes | — |
| Print bed | ||
| Heated bed | Yes | — |
| Max bed temperature | 120 °C | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB, SD card | SD card |
| Wi-Fi | Yes | No |
| Ethernet | Yes | No |
| USB | Yes | No |
| SD card | Yes | Yes |
| Bluetooth | — | No |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | Yes | — |
| Size & power | ||
| Width | 627 mm | 550 mm |
| Depth | 485 mm | 400 mm |
| Height | 615 mm | 500 mm |
| Weight | 40 kg | 11 kg |
| Noise level | 60 dB | — |
