- scrc.us.com
- Compare
- OrangeStorm Giga vs MD-400D
Elegoo OrangeStorm Giga vs Mingda MD-400D
What OrangeStorm Giga does better (5) and where MD-400D wins (3) — every spec side by side.
vs
4.4Speed7.2
4.8Print quality6.2
3.4Material versatility7.8
9.3Build volume5.0
8.2Ease of use9.2
Dimensions
Size comparison
OrangeStorm GigaMD-400D
| OrangeStorm Giga | MD-400D | Difference | |
|---|---|---|---|
| Height | 1,164 mm | 911 mm | +253 mm |
| Width | 1,224 mm | 758 mm | +466 mm |
| Depth | 1,425 mm | 660 mm | +765 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is OrangeStorm Giga better than MD-400D?
- Build volume512 L vs 64 L8×
- Build height (Z)800 mm vs 400 mm2×
- Build width (X)800 mm vs 400 mm2×
- Build depth (Y)800 mm vs 400 mm2×
- EthernetYes · MD-400D: No
Why is MD-400D better than OrangeStorm Giga?
- Max acceleration5,000 mm/s² vs 10,000 mm/s²2×
- Max nozzle temperature300 °C vs 350 °C+17%
- Max bed temperature100 °C vs 110 °C+10%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | Bed-slinger (i3-style) | — |
| Delivered as | Kit | — |
| Klipper firmware | Yes | Yes |
| Build volume | ||
| Build width (X) | 800 mm | 400 mm |
| Build depth (Y) | 800 mm | 400 mm |
| Build height (Z) | 800 mm | 400 mm |
| Build volume | 512 L | 64 L |
| Speed | ||
| Max print speed | 300 mm/s | 300 mm/s |
| Max acceleration | 5,000 mm/s² | 10,000 mm/s² |
| Max volumetric flow | — | 40 mm³/s |
| Print quality | ||
| Finest layer height | 0.1 mm | — |
| Thickest layer height | 0.4 mm | — |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 350 °C |
| Direct-drive extruder | Yes | Yes |
| Default nozzle | 0.6 mm | 0.4 mm |
| Supported nozzle sizes (mm) | 0.4, 0.6, 0.8 | — |
| Swappable nozzle / hotend | Yes | — |
| Toolheads | 1 | — |
| Nozzles | 1 | — |
| Filament diameter | 1.75 mm | — |
| Supported materials | PETG, PLA, TPU | — |
| Number of supported materials | 3 | — |
| Engineering materials (PA, PC, CF) | No | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 110 °C |
| Enclosure | ||
| Actively heated chamber | No | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | No |
| USB | Yes | Yes |
| SD card | — | No |
| Bluetooth | — | No |
| Screen size | 7″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | Yes | Yes |
| Size & power | ||
| Width | 1,224 mm | 758 mm |
| Depth | 1,425 mm | 660 mm |
| Height | 1,164 mm | 911 mm |
| Weight | 104 kg | — |
| Rated power | 500 W | 800 W |
