- scrc.us.com
- Compare
- Peek-250 vs X-MAX 3
CreatBot Peek-250 vs QIDI X-MAX 3
What Peek-250 does better (4) and where X-MAX 3 wins (6) — every spec side by side.
Dimensions
Size comparison
Peek-250X-MAX 3
| Peek-250 | X-MAX 3 | Difference | |
|---|---|---|---|
| Height | 815 mm | 601 mm | +214 mm |
| Width | 630 mm | 553 mm | +77 mm |
| Depth | 555 mm | 553 mm | +2 mm |
| Weight | 100 kg | 30.2 kg | +69.8 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Peek-250 better than X-MAX 3?
- Max nozzle temperature480 °C vs 350 °C+37%
- Max bed temperature200 °C vs 120 °C+67%
- Max chamber temperature200 °C vs 65 °C3.1×
- Screen size7″ vs 5″+40%
Why is X-MAX 3 better than Peek-250?
- Max print speed180 mm/s vs 600 mm/s3.3×
- Build volume18.8 L vs 33.3 L+77%
- Weight100 kg vs 30.2 kg3.3×
- Build height (Z)300 mm vs 315 mm+5%
- Build width (X)250 mm vs 325 mm+30%
- Build depth (Y)250 mm vs 325 mm+30%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 250 mm | 325 mm |
| Build depth (Y) | 250 mm | 325 mm |
| Build height (Z) | 300 mm | 315 mm |
| Build volume | 18.8 L | 33.3 L |
| Speed | ||
| Max print speed | 180 mm/s | 600 mm/s |
| Max acceleration | — | 20,000 mm/s² |
| Max volumetric flow | — | 35 mm³/s |
| Print quality | ||
| Finest layer height | — | 0.1 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 480 °C | 350 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | 0.4, 0.6 | 0.4, 0.8 |
| Nozzle material | — | hardened steel |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS, ASA, PC, Nylon, PETG, PVDF, Carbon Fiber, PET-CF, PET-GF, UltraPA, UltraPA-GF, UltraPA-CF, PPSU, PEEK, PEKK | — |
| Number of supported materials | 16 | — |
| Engineering materials (PA, PC, CF) | Yes | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 200 °C | 120 °C |
| Enclosure | ||
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 200 °C | 65 °C |
| Connectivity & control | ||
| Connectivity | USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | — | Yes |
| Ethernet | — | Yes |
| USB | Yes | Yes |
| Screen size | 7″ | 5″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 630 mm | 553 mm |
| Depth | 555 mm | 553 mm |
| Height | 815 mm | 601 mm |
| Weight | 100 kg | 30.2 kg |
| Rated power | 2,500 W | 900 W |
