- scrc.us.com
- Compare
- D600 Pro 2 vs S6
CreatBot D600 Pro 2 vs UltiMaker S6
What D600 Pro 2 does better (7) and where S6 wins (5) — every spec side by side.
vs
4.9Speed2.3
5.9Print quality2.7
6.4Material versatility7.0
9.6Build volume5.1
8.4Ease of use5.5
Dimensions
Size comparison
D600 Pro 2S6
| D600 Pro 2 | S6 | Difference | |
|---|---|---|---|
| Height | 1,245 mm | 780 mm | +465 mm |
| Width | 1,080 mm | 495 mm | +585 mm |
| Depth | 920 mm | 585 mm | +335 mm |
| Weight | 200 kg | 25 kg | +175 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is D600 Pro 2 better than S6?
- Build volume216 L vs 23.8 L9.1×
- Max print speed80 mm/s vs 30 mm/s2.7×
- Build height (Z)600 mm vs 300 mm2×
- Build depth (Y)600 mm vs 240 mm2.5×
- Finest layer height0.05 mm vs 0.06 mm+20%
- Build width (X)600 mm vs 330 mm+82%
- Screen size7″ vs 4.7″+49%
Why is S6 better than D600 Pro 2?
- Engineering materials (PA, PC, CF)No · D600 Pro 2: Yes
- Weight200 kg vs 25 kg8×
- EthernetNo · D600 Pro 2: Yes
- Max bed temperature100 °C vs 120 °C+20%
- Number of supported materials5 vs 8+60%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Klipper firmware | Yes | — |
| Build volume | ||
| Build width (X) | 600 mm | 330 mm |
| Build depth (Y) | 600 mm | 240 mm |
| Build height (Z) | 600 mm | 300 mm |
| Build volume | 216 L | 23.8 L |
| Speed | ||
| Max print speed | 80 mm/s | 30 mm/s |
| Max volumetric flow | 90 mm³/s | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.06 mm |
| Thickest layer height | — | 0.4 mm |
| Extruder & hotend | ||
| Max nozzle temperature | 420 °C | — |
| Default nozzle | 0.6 mm | — |
| Toolheads | — | 1 |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 2.85 mm |
| Supported materials | ASA, ABS, PLA, PET, PETG | ABS, CPE, PC, PET, PETG, PLA, PVA, TPU |
| Number of supported materials | 5 | 8 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Multi-colour | ||
| Multi-colour printing | — | Yes |
| Max colours / materials | — | 2 |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 120 °C |
| Enclosure | ||
| Actively heated chamber | Yes | — |
| Max chamber temperature | 70 °C | — |
| Air filter (carbon / HEPA) | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 7″ | 4.7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 1,080 mm | 495 mm |
| Depth | 920 mm | 585 mm |
| Height | 1,245 mm | 780 mm |
| Weight | 200 kg | 25 kg |
| Rated power | 5,500 W | 500 W |
| Noise level | — | 50 dB |
