- scrc.us.com
- Compare
- D600 Pro 2 vs U1
CreatBot D600 Pro 2 vs Snapmaker U1
What D600 Pro 2 does better (8) and where U1 wins (6) — every spec side by side.
vs
4.9Speed7.4
5.9Print quality5.9
6.4Material versatility4.1
9.6Build volume4.0
8.4Ease of use5.0
Dimensions
Size comparison
D600 Pro 2U1
| D600 Pro 2 | U1 | Difference | |
|---|---|---|---|
| Height | 1,245 mm | 730 mm | +515 mm |
| Width | 1,080 mm | 584 mm | +496 mm |
| Depth | 920 mm | 499 mm | +421 mm |
| Weight | 200 kg | 18.2 kg | +181.8 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is D600 Pro 2 better than U1?
- Build volume216 L vs 19.7 L11×
- Max volumetric flow90 mm³/s vs 32 mm³/s2.8×
- Build height (Z)600 mm vs 270 mm2.2×
- Actively heated chamberYes · U1: No
- Max nozzle temperature420 °C vs 300 °C+40%
- Build width (X)600 mm vs 270 mm2.2×
- Build depth (Y)600 mm vs 270 mm2.2×
- Screen size7″ vs 3.5″2×
Why is U1 better than D600 Pro 2?
- Max print speed80 mm/s vs 500 mm/s6.2×
- Nozzles2 vs 42×
- Engineering materials (PA, PC, CF)No · D600 Pro 2: Yes
- Weight200 kg vs 18.2 kg11×
- Number of supported materials5 vs 102×
- EthernetNo · D600 Pro 2: Yes
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | — | Fully assembled |
| All-metal frame | — | Yes |
| Klipper firmware | Yes | Yes |
| Build volume | ||
| Build width (X) | 600 mm | 270 mm |
| Build depth (Y) | 600 mm | 270 mm |
| Build height (Z) | 600 mm | 270 mm |
| Build volume | 216 L | 19.7 L |
| Speed | ||
| Max print speed | 80 mm/s | 500 mm/s |
| Max acceleration | — | 20,000 mm/s² |
| Max volumetric flow | 90 mm³/s | 32 mm³/s |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.05 mm |
| Thickest layer height | — | 0.3 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 420 °C | 300 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.6 mm | 0.4 mm |
| Nozzle material | — | stainless steel |
| Swappable nozzle / hotend | — | Yes |
| Toolheads | — | 4 |
| Nozzles | 2 | 4 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ASA, ABS, PLA, PET, PETG | ABS, ASA, PA, PA-CF, PA-GF, PC, PETG, PLA, PVA, TPU |
| Number of supported materials | 5 | 10 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Multi-colour | ||
| Multi-colour printing | — | Yes |
| Max colours / materials | — | 4 |
| Multi-colour system | — | toolchanger |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 100 °C |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | Yes | No |
| Max chamber temperature | 70 °C | — |
| Air filter (carbon / HEPA) | Yes | — |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Wi-Fi, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | No | No |
| Bluetooth | No | No |
| Screen size | 7″ | 3.5″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Silent stepper drivers | — | Yes |
| Size & power | ||
| Width | 1,080 mm | 584 mm |
| Depth | 920 mm | 499 mm |
| Height | 1,245 mm | 730 mm |
| Weight | 200 kg | 18.2 kg |
| Rated power | 5,500 W | 1,150 W |
| Noise level | — | 50 dB |
