- scrc.us.com
- Compare
- D600 Pro 2 vs Pro3 HS
CreatBot D600 Pro 2 vs Raise3D Pro3 HS
What D600 Pro 2 does better (5) and where Pro3 HS wins (6) — every spec side by side.
vs
4.9Speed7.8
5.9Print quality5.9
6.4Material versatility7.9
9.6Build volume5.9
8.4Ease of use4.5
Dimensions
Size comparison
D600 Pro 2Pro3 HS
| D600 Pro 2 | Pro3 HS | Difference | |
|---|---|---|---|
| Height | 1,245 mm | 760 mm | +485 mm |
| Width | 1,080 mm | 620 mm | +460 mm |
| Depth | 920 mm | 626 mm | +294 mm |
| Weight | 200 kg | 54 kg | +146 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is D600 Pro 2 better than Pro3 HS?
- Build volume216 L vs 27 L8×
- Build height (Z)600 mm vs 300 mm2×
- Max nozzle temperature420 °C vs 320 °C+31%
- Build width (X)600 mm vs 300 mm2×
- Build depth (Y)600 mm vs 300 mm2×
Why is Pro3 HS better than D600 Pro 2?
- Max print speed80 mm/s vs 300 mm/s3.8×
- Engineering materials (PA, PC, CF)No · D600 Pro 2: Yes
- Number of supported materials5 vs 193.8×
- Weight200 kg vs 54 kg3.7×
- EthernetNo · D600 Pro 2: Yes
- Max bed temperature100 °C vs 120 °C+20%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Klipper firmware | Yes | — |
| Build volume | ||
| Build width (X) | 600 mm | 300 mm |
| Build depth (Y) | 600 mm | 300 mm |
| Build height (Z) | 600 mm | 300 mm |
| Build volume | 216 L | 27 L |
| Speed | ||
| Max print speed | 80 mm/s | 300 mm/s |
| Max volumetric flow | 90 mm³/s | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.05 mm |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 420 °C | 320 °C |
| Default nozzle | 0.6 mm | 0.4 mm |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ASA, ABS, PLA, PET, PETG | Hyper Core: PPA CF, PPA GF, ABS CF, Hyper Speed: PLA, ABS, Industrial: PPA CF, PPA GF, PET CF, PET GF, PETG ESD, PET Support, PPA Support, Premium: PLA, ABS, ASA, PETG, PC, TPU-95A, PVA+ |
| Number of supported materials | 5 | 19 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 120 °C |
| Enclosure | ||
| Actively heated chamber | Yes | — |
| Max chamber temperature | 70 °C | — |
| Air filter (carbon / HEPA) | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 7″ | — |
| Touchscreen | Yes | — |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Size & power | ||
| Width | 1,080 mm | 620 mm |
| Depth | 920 mm | 626 mm |
| Height | 1,245 mm | 760 mm |
| Weight | 200 kg | 54 kg |
| Rated power | 5,500 W | 600 W |
| Noise level | — | 55 dB |
