- scrc.us.com
- Compare
- D600 Pro 2 vs XL+
CreatBot D600 Pro 2 vs Prusa XL+
What D600 Pro 2 does better (7) and where XL+ wins (5) — every spec side by side.
5.9Print quality5.9
6.4Material versatility4.3
9.6Build volume7.7
8.4Ease of use3.2
Dimensions
Size comparison
D600 Pro 2XL+
| D600 Pro 2 | XL+ | Difference | |
|---|---|---|---|
| Height | 1,245 mm | 720 mm | +525 mm |
| Width | 1,080 mm | 700 mm | +380 mm |
| Depth | 920 mm | 900 mm | +20 mm |
| Weight | 200 kg | 27.9 kg | +172.1 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is D600 Pro 2 better than XL+?
- Build volume216 L vs 46.7 L4.6×
- Actively heated chamberYes · XL+: No
- Max nozzle temperature420 °C vs 290 °C+45%
- Build height (Z)600 mm vs 360 mm+67%
- Screen size7″ vs 3.5″2×
- Build width (X)600 mm vs 360 mm+67%
- Build depth (Y)600 mm vs 360 mm+67%
Why is XL+ better than D600 Pro 2?
- Engineering materials (PA, PC, CF)No · D600 Pro 2: Yes
- Weight200 kg vs 27.9 kg7.2×
- EthernetNo · D600 Pro 2: Yes
- Max bed temperature100 °C vs 120 °C+20%
- Number of supported materials5 vs 9+80%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | Delta |
| Delivered as | — | Fully assembled |
| Klipper firmware | Yes | — |
| Build volume | ||
| Build width (X) | 600 mm | 360 mm |
| Build depth (Y) | 600 mm | 360 mm |
| Build height (Z) | 600 mm | 360 mm |
| Build volume | 216 L | 46.7 L |
| Speed | ||
| Max print speed | 80 mm/s | — |
| Max volumetric flow | 90 mm³/s | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.05 mm |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 420 °C | 290 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.6 mm | 0.4 mm |
| Toolheads | — | 5 |
| Nozzles | 2 | — |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ASA, ABS, PLA, PET, PETG | PLA, PETG, Flex, PVA, PC, PP, CPE, ASA, HIPS |
| Number of supported materials | 5 | 9 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Multi-colour | ||
| Multi-colour printing | — | Yes |
| Max colours / materials | — | 5 |
| Multi-colour system | — | toolchanger |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 120 °C |
| Enclosure | ||
| Actively heated chamber | Yes | No |
| Max chamber temperature | 70 °C | — |
| Air filter (carbon / HEPA) | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Ethernet, USB, Wi-Fi, NFC |
| Wi-Fi | Yes | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| NFC (filament / setup) | — | Yes |
| App control | — | Yes |
| Screen size | 7″ | 3.5″ |
| Touchscreen | Yes | — |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 1,080 mm | 700 mm |
| Depth | 920 mm | 900 mm |
| Height | 1,245 mm | 720 mm |
| Weight | 200 kg | 27.9 kg |
| Rated power | 5,500 W | 120 W |
