- scrc.us.com
- Compare
- D600 Pro 2 vs Creator Pro 2
CreatBot D600 Pro 2 vs Flashforge Creator Pro 2
What D600 Pro 2 does better (6) and where Creator Pro 2 wins (4) — every spec side by side.
vs
4.9Speed2.6
5.9Print quality2.4
6.4Material versatility2.6
9.6Build volume2.1
Dimensions
Size comparison
D600 Pro 2Creator Pro 2
| D600 Pro 2 | Creator Pro 2 | Difference | |
|---|---|---|---|
| Height | 1,245 mm | 403 mm | +842 mm |
| Width | 1,080 mm | 526 mm | +554 mm |
| Depth | 920 mm | 360 mm | +560 mm |
| Weight | 200 kg | 14.8 kg | +185.2 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is D600 Pro 2 better than Creator Pro 2?
- Build volume216 L vs 4.4 L49.1×
- Build height (Z)600 mm vs 150 mm4×
- Max nozzle temperature420 °C vs 240 °C+75%
- Finest layer height0.05 mm vs 0.1 mm2×
- Build width (X)600 mm vs 200 mm3×
- Build depth (Y)600 mm vs 148 mm4.1×
Why is Creator Pro 2 better than D600 Pro 2?
- Max print speed80 mm/s vs 100 mm/s+25%
- Weight200 kg vs 14.8 kg13.5×
- Number of supported materials5 vs 102×
- Max bed temperature100 °C vs 120 °C+20%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | — | Fully assembled |
| Klipper firmware | Yes | — |
| Build volume | ||
| Build width (X) | 600 mm | 200 mm |
| Build depth (Y) | 600 mm | 148 mm |
| Build height (Z) | 600 mm | 150 mm |
| Build volume | 216 L | 4.4 L |
| Speed | ||
| Max print speed | 80 mm/s | 100 mm/s |
| Max volumetric flow | 90 mm³/s | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.1 mm |
| Thickest layer height | — | 0.4 mm |
| Extruder & hotend | ||
| Max nozzle temperature | 420 °C | 240 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.6 mm | 0.4 mm |
| Nozzle material | — | brass |
| Swappable nozzle / hotend | — | Yes |
| Toolheads | — | 2 |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ASA, ABS, PLA, PET, PETG | ABS, Flex, HIPS, PET, PETG, PLA, PVA, TPC, TPE, TPU |
| Number of supported materials | 5 | 10 |
| Engineering materials (PA, PC, CF) | No | No |
| Multi-colour | ||
| Multi-colour printing | — | Yes |
| Max colours / materials | — | 2 |
| Multi-colour system | — | toolchanger |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 120 °C |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | Yes | — |
| Max chamber temperature | 70 °C | — |
| Air filter (carbon / HEPA) | Yes | — |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | USB, SD card |
| Wi-Fi | Yes | — |
| Ethernet | No | — |
| USB | Yes | Yes |
| SD card | No | Yes |
| Bluetooth | No | — |
| Screen size | 7″ | — |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 1,080 mm | 526 mm |
| Depth | 920 mm | 360 mm |
| Height | 1,245 mm | 403 mm |
| Weight | 200 kg | 14.8 kg |
| Rated power | 5,500 W | 320 W |
| Noise level | — | 55 dB |
