- scrc.us.com
- Compare
- D600 Pro 2 vs F430
CreatBot D600 Pro 2 vs CreatBot F430
What D600 Pro 2 does better (5) and where F430 wins (6) — every spec side by side.
vs
4.9Speed4.6
5.9Print quality8.2
6.4Material versatility8.8
9.6Build volume7.2
8.4Ease of use3.7
Dimensions
Size comparison
D600 Pro 2F430
| D600 Pro 2 | F430 | Difference | |
|---|---|---|---|
| Height | 1,245 mm | 680 mm | +565 mm |
| Width | 1,080 mm | 620 mm | +460 mm |
| Depth | 920 mm | 485 mm | +435 mm |
| Weight | 200 kg | 48 kg | +152 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is D600 Pro 2 better than F430?
- Build volume216 L vs 36 L6×
- Build height (Z)600 mm vs 300 mm2×
- Build depth (Y)600 mm vs 300 mm2×
- Screen size7″ vs 4.3″+63%
- Build width (X)600 mm vs 400 mm+50%
Why is F430 better than D600 Pro 2?
- Max print speed80 mm/s vs 180 mm/s2.2×
- Engineering materials (PA, PC, CF)No · D600 Pro 2: Yes
- Number of supported materials5 vs 173.4×
- Weight200 kg vs 48 kg4.2×
- Max bed temperature100 °C vs 140 °C+40%
- Finest layer height0.05 mm vs 0.04 mm+25%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Klipper firmware | Yes | — |
| Build volume | ||
| Build width (X) | 600 mm | 400 mm |
| Build depth (Y) | 600 mm | 300 mm |
| Build height (Z) | 600 mm | 300 mm |
| Build volume | 216 L | 36 L |
| Speed | ||
| Max print speed | 80 mm/s | 180 mm/s |
| Max volumetric flow | 90 mm³/s | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.04 mm |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 420 °C | 420 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.6 mm | 0.4 mm |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ASA, ABS, PLA, PET, PETG | PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PETG, HIPS, PP, Flexible, TPU, PVA, UltraPA, PA-CF, PA-GF, ASA, PVDF |
| Number of supported materials | 5 | 17 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 140 °C |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 70 °C | 70 °C |
| Air filter (carbon / HEPA) | Yes | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | USB |
| Wi-Fi | Yes | — |
| Ethernet | No | — |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 7″ | 4.3″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | — |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 1,080 mm | 620 mm |
| Depth | 920 mm | 485 mm |
| Height | 1,245 mm | 680 mm |
| Weight | 200 kg | 48 kg |
| Rated power | 5,500 W | 2,700 W |
