- scrc.us.com
- Compare
- Sermoon D3 Pro vs MD-600D
Creality Sermoon D3 Pro vs Mingda MD-600D
What Sermoon D3 Pro does better (1) and where MD-600D wins (7) — every spec side by side.
vs
7.8Speed6.9
3.8Print quality5.9
4.6Material versatility7.5
4.2Build volume9.6
5.2Ease of use8.6
Dimensions
Size comparison
Sermoon D3 ProMD-600D
| Sermoon D3 Pro | MD-600D | Difference | |
|---|---|---|---|
| Height | 656 mm | 1,265 mm | −609 mm |
| Width | 553 mm | 1,325 mm | −772 mm |
| Depth | 578 mm | 965 mm | −387 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Sermoon D3 Pro better than MD-600D?
- Max bed temperature120 °C vs 110 °C+9%
Why is MD-600D better than Sermoon D3 Pro?
- Build volume19.1 L vs 216 L11.3×
- Build height (Z)300 mm vs 600 mm2×
- Engineering materials (PA, PC, CF)No · Sermoon D3 Pro: Yes
- Max nozzle temperature300 °C vs 350 °C+17%
- Build depth (Y)220 mm vs 600 mm2.7×
- Screen size4.3″ vs 10″2.3×
- Build width (X)290 mm vs 600 mm2.1×
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | Fully assembled | — |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 290 mm | 600 mm |
| Build depth (Y) | 220 mm | 600 mm |
| Build height (Z) | 300 mm | 600 mm |
| Build volume | 19.1 L | 216 L |
| Speed | ||
| Max print speed | 300 mm/s | 300 mm/s |
| Max acceleration | — | 10,000 mm/s² |
| Max volumetric flow | — | 40 mm³/s |
| Print quality | ||
| Finest layer height | 0.1 mm | — |
| Thickest layer height | 0.35 mm | — |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 350 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.6 mm |
| Nozzle material | hardened steel | — |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | — |
| Supported materials | PLA, PETG, TPU, PVA, HIPS, ABS, ASA | PETG, GF, HtPA-CF, GF, HtPA-GF25, CF25, S-HtPA |
| Number of supported materials | 7 | 7 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 110 °C |
| Enclosure | ||
| Actively heated chamber | Yes | — |
| Max chamber temperature | 60 °C | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | — |
| USB | Yes | — |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | 4.3″ | 10″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 553 mm | 1,325 mm |
| Depth | 578 mm | 965 mm |
| Height | 656 mm | 1,265 mm |
| Weight | 43 kg | — |
| Rated power | 1,300 W | 2,400 W |
