- scrc.us.com
- Compare
- K2 Plus vs MD-600D
Creality K2 Plus vs Mingda MD-600D
What K2 Plus does better (4) and where MD-600D wins (7) — every spec side by side.
Dimensions
Size comparison
K2 PlusMD-600D
| K2 Plus | MD-600D | Difference | |
|---|---|---|---|
| Height | 640 mm | 1,265 mm | −625 mm |
| Width | 495 mm | 1,325 mm | −830 mm |
| Depth | 515 mm | 965 mm | −450 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is K2 Plus better than MD-600D?
- Max acceleration30,000 mm/s² vs 10,000 mm/s²3×
- Max print speed600 mm/s vs 300 mm/s2×
- Max bed temperature120 °C vs 110 °C+9%
- Number of supported materials8 vs 7+14%
Why is MD-600D better than K2 Plus?
- Build volume42.9 L vs 216 L5×
- Nozzles1 vs 22×
- Build height (Z)350 mm vs 600 mm+71%
- Screen size4.3″ vs 10″2.3×
- Max volumetric flow32 mm³/s vs 40 mm³/s+25%
- Build width (X)350 mm vs 600 mm+71%
- Build depth (Y)350 mm vs 600 mm+71%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | CoreXY / XY-head | — |
| Delivered as | Fully assembled | — |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 350 mm | 600 mm |
| Build depth (Y) | 350 mm | 600 mm |
| Build height (Z) | 350 mm | 600 mm |
| Build volume | 42.9 L | 216 L |
| Speed | ||
| Max print speed | 600 mm/s | 300 mm/s |
| Max acceleration | 30,000 mm/s² | 10,000 mm/s² |
| Max volumetric flow | 32 mm³/s | 40 mm³/s |
| Print quality | ||
| Finest layer height | 0.1 mm | — |
| Thickest layer height | 0.35 mm | — |
| Vibration compensation (input shaping) | Yes | — |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 350 °C | 350 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.6 mm |
| Nozzle material | brass | — |
| Swappable nozzle / hotend | Yes | — |
| Toolheads | 1 | — |
| Nozzles | 1 | 2 |
| Filament diameter | 1.75 mm | — |
| Supported materials | ABS, ASA, Carbon, PA, PC, PET, PETG, TPU | PETG, GF, HtPA-CF, GF, HtPA-GF25, CF25, S-HtPA |
| Number of supported materials | 8 | 7 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Multi-colour | ||
| Multi-colour printing | Yes | — |
| Max colours / materials | 4 | — |
| Multi-colour system | CFS | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 120 °C | 110 °C |
| Flexible magnetic build plate | Yes | — |
| Enclosure | ||
| Enclosed build chamber | Yes | — |
| Actively heated chamber | Yes | — |
| Max chamber temperature | 60 °C | — |
| Air filter (carbon / HEPA) | Yes | — |
| Chamber light | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB, NFC | Wi-Fi |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | — |
| USB | Yes | — |
| SD card | No | — |
| Bluetooth | No | — |
| NFC (filament / setup) | Yes | — |
| Screen size | 4.3″ | 10″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | Yes | Yes |
| Power-loss recovery | Yes | Yes |
| Silent stepper drivers | Yes | — |
| Size & power | ||
| Width | 495 mm | 1,325 mm |
| Depth | 515 mm | 965 mm |
| Height | 640 mm | 1,265 mm |
| Weight | 33.5 kg | — |
| Rated power | 1,200 W | 2,400 W |
