- scrc.us.com
- Compare
- Ender 6 vs Artisan
Creality Ender 6 vs Snapmaker Artisan
What Ender 6 does better (1) and where Artisan wins (11) — every spec side by side.
Dimensions
Size comparison
Ender 6Artisan
| Ender 6 | Artisan | Difference | |
|---|---|---|---|
| Height | 650 mm | 634 mm | +16 mm |
| Width | 469 mm | 580 mm | −111 mm |
| Depth | 495 mm | 620 mm | −125 mm |
| Weight | 22 kg | 25 kg | −3 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Ender 6 better than Artisan?
- Weight22 kg vs 25 kg+14%
Why is Artisan better than Ender 6?
- Build volume25 L vs 56 L2.2×
- Finest layer height0.1 mm vs 0.05 mm2×
- Direct-drive extruderNo · Ender 6: Yes
- Engineering materials (PA, PC, CF)No · Ender 6: Yes
- Wi-FiNo · Ender 6: Yes
- Number of supported materials3 vs 103.3×
- Delivered asPartially assembled vs Fully assembled
- EthernetNo · Ender 6: Yes
- Screen size4.3″ vs 7″+63%
- Build depth (Y)250 mm vs 400 mm+60%
- Build width (X)250 mm vs 350 mm+40%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | CoreXY / XY-head | CoreXY / XY-head |
| Delivered as | Partially assembled | Fully assembled |
| All-metal frame | Yes | Yes |
| Build volume | ||
| Build width (X) | 250 mm | 350 mm |
| Build depth (Y) | 250 mm | 400 mm |
| Build height (Z) | 400 mm | 400 mm |
| Build volume | 25 L | 56 L |
| Speed | ||
| Max print speed | 180 mm/s | 180 mm/s |
| Print quality | ||
| Finest layer height | 0.1 mm | 0.05 mm |
| Thickest layer height | 0.4 mm | 0.3 mm |
| Extruder & hotend | ||
| Max nozzle temperature | — | 300 °C |
| Direct-drive extruder | No | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzle material | brass | brass |
| Swappable nozzle / hotend | Yes | Yes |
| Toolheads | 1 | 1 |
| Nozzles | 1 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, TPU, Wood | ABS, ASA, HIPS, PA, PA-CF, PA-GF, PETG, PLA, PVA, TPU |
| Number of supported materials | 3 | 10 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | — | 110 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | Yes |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | USB, SD card | Wi-Fi, USB |
| Wi-Fi | No | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | Yes | No |
| Bluetooth | No | No |
| Screen size | 4.3″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | No | — |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Silent stepper drivers | Yes | — |
| Laser engraving module | — | Yes |
| Size & power | ||
| Width | 469 mm | 580 mm |
| Depth | 495 mm | 620 mm |
| Height | 650 mm | 634 mm |
| Weight | 22 kg | 25 kg |
| Rated power | 360 W | 800 W |
| Noise level | — | 50 dB |
