- scrc.us.com
- Compare
- CR-30 Printmill Belt vs 3D DigiLab 3D45
Creality CR-30 Printmill Belt vs Dremel 3D DigiLab 3D45
What CR-30 Printmill Belt does better (1) and where 3D DigiLab 3D45 wins (2) — every spec side by side.
Dimensions
Size comparison
CR-30 Printmill Belt3D DigiLab 3D45
| CR-30 Printmill Belt | 3D DigiLab 3D45 | Difference | |
|---|---|---|---|
| Height | 410 mm | 406 mm | +4 mm |
| Width | 535 mm | 515 mm | +20 mm |
| Depth | 656 mm | 394 mm | +262 mm |
| Weight | 16.5 kg | 19.4 kg | −2.9 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is CR-30 Printmill Belt better than 3D DigiLab 3D45?
- Weight16.5 kg vs 19.4 kg+18%
Why is 3D DigiLab 3D45 better than CR-30 Printmill Belt?
- Wi-FiNo · CR-30 Printmill Belt: Yes
- EthernetNo · CR-30 Printmill Belt: Yes
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Build volume | ||
| Build width (X) | — | 255 mm |
| Build depth (Y) | — | 155 mm |
| Build height (Z) | — | 170 mm |
| Build volume | — | 6.7 L |
| Print quality | ||
| Finest layer height | — | 0.05 mm |
| Thickest layer height | — | 0.1 mm |
| Extruder & hotend | ||
| Default nozzle | 0.4 mm | — |
| Toolheads | — | 1 |
| Nozzles | — | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, TPU, PETG | — |
| Number of supported materials | 3 | — |
| Engineering materials (PA, PC, CF) | No | — |
| Print bed | ||
| Heated bed | — | Yes |
| Connectivity & control | ||
| Connectivity | USB, SD card | Wi-Fi, Ethernet, USB, SD card |
| Wi-Fi | No | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | Yes | Yes |
| Bluetooth | No | — |
| Size & power | ||
| Width | 535 mm | 515 mm |
| Depth | 656 mm | 394 mm |
| Height | 410 mm | 406 mm |
| Weight | 16.5 kg | 19.4 kg |
| Rated power | 350 W | — |
