- scrc.us.com
- Compare
- CR-30 Printmill Belt vs F160
Creality CR-30 Printmill Belt vs CreatBot F160
What CR-30 Printmill Belt does better (1) and where F160 wins (0) — every spec side by side.
vs
Dimensions
Size comparison
CR-30 Printmill BeltF160
| CR-30 Printmill Belt | F160 | Difference | |
|---|---|---|---|
| Height | 410 mm | 490 mm | −80 mm |
| Width | 535 mm | 370 mm | +165 mm |
| Depth | 656 mm | 320 mm | +336 mm |
| Weight | 16.5 kg | 18 kg | −1.5 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is CR-30 Printmill Belt better than F160?
- Weight16.5 kg vs 18 kg+9%
Why is F160 better than CR-30 Printmill Belt?
F160 has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Build volume | ||
| Build width (X) | — | 160 mm |
| Build depth (Y) | — | 160 mm |
| Build height (Z) | — | 200 mm |
| Build volume | — | 5.1 L |
| Speed | ||
| Max print speed | — | 300 mm/s |
| Print quality | ||
| Finest layer height | — | 0.05 mm |
| Automatic bed levelling | — | No |
| Extruder & hotend | ||
| Max nozzle temperature | — | 420 °C |
| Default nozzle | 0.4 mm | 0.4 mm |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, TPU, PETG | — |
| Number of supported materials | 3 | — |
| Engineering materials (PA, PC, CF) | No | — |
| Print bed | ||
| Heated bed | — | Yes |
| Max bed temperature | — | 150 °C |
| Enclosure | ||
| Actively heated chamber | — | Yes |
| Max chamber temperature | — | 70 °C |
| Connectivity & control | ||
| Connectivity | USB, SD card | USB |
| Wi-Fi | No | — |
| Ethernet | No | — |
| USB | Yes | Yes |
| SD card | Yes | — |
| Bluetooth | No | — |
| Screen size | — | 4.3″ |
| Touchscreen | — | Yes |
| Features | ||
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 535 mm | 370 mm |
| Depth | 656 mm | 320 mm |
| Height | 410 mm | 490 mm |
| Weight | 16.5 kg | 18 kg |
| Rated power | 350 W | 1,100 W |
