- scrc.us.com
- Compare
- CR-10 v2 vs CR-6 MAX
Creality CR-10 v2 vs Creality CR-6 MAX
What CR-10 v2 does better (1) and where CR-6 MAX wins (4) — every spec side by side.
Why is CR-10 v2 better than CR-6 MAX?
- Weight11.5 kg vs 18.5 kg+61%
Why is CR-6 MAX better than CR-10 v2?
- Build volume36 L vs 64 L+78%
- Max print speed80 mm/s vs 100 mm/s+25%
- Build width (X)300 mm vs 400 mm+33%
- Build depth (Y)300 mm vs 400 mm+33%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | Bed-slinger (i3-style) |
| Delivered as | Kit | Kit |
| All-metal frame | — | Yes |
| Build volume | ||
| Build width (X) | 300 mm | 400 mm |
| Build depth (Y) | 300 mm | 400 mm |
| Build height (Z) | 400 mm | 400 mm |
| Build volume | 36 L | 64 L |
| Speed | ||
| Max print speed | 80 mm/s | 100 mm/s |
| Print quality | ||
| Finest layer height | — | 0.1 mm |
| Thickest layer height | — | 0.4 mm |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | — | 260 °C |
| Direct-drive extruder | — | No |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzle material | — | brass |
| Swappable nozzle / hotend | — | Yes |
| Toolheads | — | 1 |
| Nozzles | — | 1 |
| Filament diameter | — | 1.75 mm |
| Supported materials | ABS, PLA, TPU, Wood | PETG, PLA, TPU, Wood |
| Number of supported materials | 4 | 4 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | — | Yes |
| Max bed temperature | — | 90 °C |
| Connectivity & control | ||
| Connectivity | — | USB, SD card |
| USB | — | Yes |
| SD card | — | Yes |
| Screen size | — | 4.3″ |
| Touchscreen | — | Yes |
| Features | ||
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Silent stepper drivers | — | Yes |
| Size & power | ||
| Width | — | 691 mm |
| Depth | — | 640 mm |
| Height | — | 725 mm |
| Weight | 11.5 kg | 18.5 kg |
| Rated power | — | 500 W |
