- scrc.us.com
- Compare
- Flow XL vs D600 Pro 2
CraftBot Flow XL vs CreatBot D600 Pro 2
What Flow XL does better (5) and where D600 Pro 2 wins (6) — every spec side by side.
vs
5.9Speed4.9
5.9Print quality5.9
4.9Material versatility6.4
6.3Build volume9.6
8.1Ease of use8.4
Dimensions
Size comparison
Flow XLD600 Pro 2
| Flow XL | D600 Pro 2 | Difference | |
|---|---|---|---|
| Height | 790 mm | 1,245 mm | −455 mm |
| Width | 485 mm | 1,080 mm | −595 mm |
| Depth | 400 mm | 920 mm | −520 mm |
| Weight | 32 kg | 200 kg | −168 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Flow XL better than D600 Pro 2?
- Max print speed200 mm/s vs 80 mm/s2.5×
- Engineering materials (PA, PC, CF)Yes · D600 Pro 2: No
- Weight32 kg vs 200 kg6.2×
- Max bed temperature110 °C vs 100 °C+10%
- Number of supported materials6 vs 5+20%
Why is D600 Pro 2 better than Flow XL?
- Build volume30 L vs 216 L7.2×
- Max nozzle temperature300 °C vs 420 °C+40%
- Build depth (Y)200 mm vs 600 mm3×
- Build width (X)300 mm vs 600 mm2×
- Build height (Z)500 mm vs 600 mm+20%
- Screen size5″ vs 7″+40%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 300 mm | 600 mm |
| Build depth (Y) | 200 mm | 600 mm |
| Build height (Z) | 500 mm | 600 mm |
| Build volume | 30 L | 216 L |
| Speed | ||
| Max print speed | 200 mm/s | 80 mm/s |
| Max volumetric flow | — | 90 mm³/s |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.05 mm |
| Thickest layer height | 0.4 mm | — |
| Extruder & hotend | ||
| Max nozzle temperature | 300 °C | 420 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.6 mm |
| Supported nozzle sizes (mm) | 0.25, 0.4, 0.6, 0.8 | — |
| Nozzles | 2 | 2 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, PVA, ABS, HIPS, PET, Nylon | ASA, ABS, PLA, PET, PETG |
| Number of supported materials | 6 | 5 |
| Engineering materials (PA, PC, CF) | Yes | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 100 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | — |
| Actively heated chamber | — | Yes |
| Max chamber temperature | — | 70 °C |
| Air filter (carbon / HEPA) | — | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Wi-Fi, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | No | No |
| USB | Yes | Yes |
| SD card | No | No |
| Bluetooth | No | No |
| Screen size | 5″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | Yes | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 485 mm | 1,080 mm |
| Depth | 400 mm | 920 mm |
| Height | 790 mm | 1,245 mm |
| Weight | 32 kg | 200 kg |
| Rated power | — | 5,500 W |
