- scrc.us.com
- Compare
- Kobra 2 Max vs UP600
Anycubic Kobra 2 Max vs Tiertime UP600
What Kobra 2 Max does better (3) and where UP600 wins (8) — every spec side by side.
vs
7.6Print quality4.1
6.9Build volume7.6
Dimensions
Size comparison
Kobra 2 MaxUP600
| Kobra 2 Max | UP600 | Difference | |
|---|---|---|---|
| Height | 740 mm | 850 mm | −110 mm |
| Width | 735 mm | 780 mm | −45 mm |
| Depth | 640 mm | 1,150 mm | −510 mm |
| Weight | 21 kg | 120 kg | −99 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Kobra 2 Max better than UP600?
- Finest layer height0.05 mm vs 0.1 mm2×
- Weight21 kg vs 120 kg5.7×
- Build depth (Y)420 mm vs 400 mm+5%
Why is UP600 better than Kobra 2 Max?
- Build volume88.2 L vs 120 L+36%
- Wi-FiNo · Kobra 2 Max: Yes
- Max nozzle temperature260 °C vs 300 °C+15%
- Delivered asPartially assembled vs Fully assembled
- EthernetNo · Kobra 2 Max: Yes
- Build height (Z)500 mm vs 600 mm+20%
- Screen size4.3″ vs 7″+63%
- Build width (X)420 mm vs 500 mm+19%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | Bed-slinger (i3-style) | — |
| Delivered as | Partially assembled | Fully assembled |
| All-metal frame | Yes | — |
| Build volume | ||
| Build width (X) | 420 mm | 500 mm |
| Build depth (Y) | 420 mm | 400 mm |
| Build height (Z) | 500 mm | 600 mm |
| Build volume | 88.2 L | 120 L |
| Speed | ||
| Max print speed | 500 mm/s | — |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.1 mm |
| Thickest layer height | 0.3 mm | 0.4 mm |
| Automatic bed levelling | Yes | — |
| Extruder & hotend | ||
| Max nozzle temperature | 260 °C | 300 °C |
| Direct-drive extruder | Yes | — |
| Default nozzle | 0.4 mm | 0.4 mm |
| Supported nozzle sizes (mm) | — | 0.4, 0.5, 0.6, 0.8 |
| Nozzle material | brass | — |
| Swappable nozzle / hotend | Yes | — |
| Toolheads | 1 | — |
| Nozzles | 1 | — |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, PETG, PLA, TPU | — |
| Number of supported materials | 4 | — |
| Engineering materials (PA, PC, CF) | No | — |
| Print bed | ||
| Heated bed | Yes | — |
| Max bed temperature | 110 °C | — |
| Connectivity & control | ||
| Connectivity | USB, SD card | Wi-Fi, Ethernet, USB |
| Wi-Fi | No | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | Yes | — |
| Bluetooth | No | — |
| Screen size | 4.3″ | 7″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | No | — |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 735 mm | 780 mm |
| Depth | 640 mm | 1,150 mm |
| Height | 740 mm | 850 mm |
| Weight | 21 kg | 120 kg |
