- scrc.us.com
- Compare
- Kobra 2 Max vs Sidewinder X3 Plus
Anycubic Kobra 2 Max vs Artillery Sidewinder X3 Plus
What Kobra 2 Max does better (6) and where Sidewinder X3 Plus wins (1) — every spec side by side.
vs
8.7Speed7.6
7.6Print quality6.2
3.8Material versatility3.0
6.9Build volume3.3
3.6Ease of use2.2
Dimensions
Size comparison
Kobra 2 MaxSidewinder X3 Plus
| Kobra 2 Max | Sidewinder X3 Plus | Difference | |
|---|---|---|---|
| Height | 740 mm | 870 mm | −130 mm |
| Width | 735 mm | 405 mm | +330 mm |
| Depth | 640 mm | 550 mm | +90 mm |
| Weight | 21 kg | 16.6 kg | +4.4 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Kobra 2 Max better than Sidewinder X3 Plus?
- Build volume88.2 L vs 36 L2.4×
- Max print speed500 mm/s vs 300 mm/s+67%
- Build height (Z)500 mm vs 400 mm+25%
- Max bed temperature110 °C vs 100 °C+10%
- Build width (X)420 mm vs 300 mm+40%
- Build depth (Y)420 mm vs 300 mm+40%
Why is Sidewinder X3 Plus better than Kobra 2 Max?
- Weight21 kg vs 16.6 kg+27%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | Bed-slinger (i3-style) | Bed-slinger (i3-style) |
| Delivered as | Partially assembled | — |
| All-metal frame | Yes | — |
| Build volume | ||
| Build width (X) | 420 mm | 300 mm |
| Build depth (Y) | 420 mm | 300 mm |
| Build height (Z) | 500 mm | 400 mm |
| Build volume | 88.2 L | 36 L |
| Speed | ||
| Max print speed | 500 mm/s | 300 mm/s |
| Print quality | ||
| Finest layer height | 0.05 mm | — |
| Thickest layer height | 0.3 mm | — |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 260 °C | — |
| Direct-drive extruder | Yes | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzle material | brass | — |
| Swappable nozzle / hotend | Yes | — |
| Toolheads | 1 | 1 |
| Nozzles | 1 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, PETG, PLA, TPU | ABS, PETG, PLA, TPU |
| Number of supported materials | 4 | 4 |
| Engineering materials (PA, PC, CF) | No | No |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 100 °C |
| Connectivity & control | ||
| Connectivity | USB, SD card | USB |
| Wi-Fi | No | No |
| Ethernet | No | No |
| USB | Yes | Yes |
| SD card | Yes | Yes |
| Bluetooth | No | No |
| Screen size | 4.3″ | 4.3″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | No | No |
| Filament runout sensor | Yes | — |
| Power-loss recovery | Yes | — |
| Size & power | ||
| Width | 735 mm | 405 mm |
| Depth | 640 mm | 550 mm |
| Height | 740 mm | 870 mm |
| Weight | 21 kg | 16.6 kg |
| Rated power | — | 300 W |
