- scrc.us.com
- Compare
- 2.0 A250T vs V2.4
Snapmaker 2.0 A250T vs Voron V2.4
What 2.0 A250T does better (3) and where V2.4 wins (5) — every spec side by side.
Why is 2.0 A250T better than V2.4?
- Finest layer height0.05 mm vs 0.1 mm2×
- Wi-FiYes · V2.4: No
- Delivered asPartially assembled vs Kit
Why is V2.4 better than 2.0 A250T?
- Max print speed100 mm/s vs 250 mm/s2.5×
- Build volume13.5 L vs 15.6 L+16%
- Max bed temperature100 °C vs 120 °C+20%
- Build height (Z)235 mm vs 250 mm+6%
- Build width (X)230 mm vs 250 mm+9%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | Partially assembled | Kit |
| All-metal frame | Yes | Yes |
| Klipper firmware | — | Yes |
| Open-source design | — | Yes |
| Build volume | ||
| Build width (X) | 230 mm | 250 mm |
| Build depth (Y) | 250 mm | 250 mm |
| Build height (Z) | 235 mm | 250 mm |
| Build volume | 13.5 L | 15.6 L |
| Speed | ||
| Max print speed | 100 mm/s | 250 mm/s |
| Print quality | ||
| Finest layer height | 0.05 mm | 0.1 mm |
| Thickest layer height | 0.3 mm | 0.4 mm |
| Automatic bed levelling | Yes | — |
| Extruder & hotend | ||
| Max nozzle temperature | 275 °C | — |
| Direct-drive extruder | Yes | Yes |
| Default nozzle | 0.4 mm | — |
| Nozzle material | brass | — |
| Toolheads | 1 | 1 |
| Nozzles | 1 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, PETG, PLA, TPU, Wood | — |
| Number of supported materials | 5 | — |
| Engineering materials (PA, PC, CF) | No | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 100 °C | 120 °C |
| Enclosure | ||
| Enclosed build chamber | Yes | Yes |
| Chamber light | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | USB, SD card |
| Wi-Fi | Yes | No |
| Ethernet | — | No |
| USB | Yes | Yes |
| SD card | — | Yes |
| Bluetooth | — | No |
| Screen size | 5″ | — |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | No | — |
| Silent stepper drivers | — | Yes |
| Laser engraving module | Yes | — |
| Size & power | ||
| Width | 530 mm | — |
| Depth | 624 mm | — |
| Height | 507 mm | — |
| Rated power | 320 W | — |
