- scrc.us.com
- Compare
- Plus4 vs Trident
QIDI Plus4 vs Voron Trident
What Plus4 does better (5) and where Trident wins (0) — every spec side by side.
Why is Plus4 better than Trident?
- Max print speed600 mm/s vs 250 mm/s2.4×
- Build volume26 L vs 15.6 L+67%
- Build height (Z)280 mm vs 250 mm+12%
- Build width (X)305 mm vs 250 mm+22%
- Build depth (Y)305 mm vs 250 mm+22%
Why is Trident better than Plus4?
Trident has no measurable advantages in this pair.
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | CoreXY / XY-head | CoreXY / XY-head |
| Delivered as | — | Kit |
| All-metal frame | — | Yes |
| Klipper firmware | — | Yes |
| Open-source design | — | Yes |
| Build volume | ||
| Build width (X) | 305 mm | 250 mm |
| Build depth (Y) | 305 mm | 250 mm |
| Build height (Z) | 280 mm | 250 mm |
| Build volume | 26 L | 15.6 L |
| Speed | ||
| Max print speed | 600 mm/s | 250 mm/s |
| Print quality | ||
| Finest layer height | — | 0.1 mm |
| Thickest layer height | — | 0.4 mm |
| Automatic bed levelling | Yes | — |
| Extruder & hotend | ||
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.4 mm | — |
| Toolheads | — | 1 |
| Nozzles | — | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ASA, ABS, PETG, TPU | — |
| Number of supported materials | 5 | — |
| Engineering materials (PA, PC, CF) | No | — |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | — | 120 °C |
| Enclosure | ||
| Enclosed build chamber | — | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | USB, SD card |
| Wi-Fi | Yes | — |
| Ethernet | No | — |
| USB | Yes | Yes |
| SD card | No | Yes |
| Bluetooth | No | — |
| Touchscreen | Yes | Yes |
| Features | ||
| Silent stepper drivers | — | Yes |
| Size & power | ||
| Width | 505 mm | — |
| Depth | 487 mm | — |
| Height | 550 mm | — |
| Weight | 32 kg | — |
