- scrc.us.com
- Compare
- Funmat Pro 310 APOLLO vs Q1 Pro
INTAMSYS Funmat Pro 310 APOLLO vs QIDI Q1 Pro
What Funmat Pro 310 APOLLO does better (9) and where Q1 Pro wins (3) — every spec side by side.
vs
5.1Speed6.4
3.3Print quality5.6
9.2Material versatility9.4
4.5Build volume4.4
9.0Ease of use6.9
Dimensions
Size comparison
Funmat Pro 310 APOLLOQ1 Pro
| Funmat Pro 310 APOLLO | Q1 Pro | Difference | |
|---|---|---|---|
| Height | 700 mm | 489 mm | +211 mm |
| Width | 700 mm | 477 mm | +223 mm |
| Depth | 655 mm | 467 mm | +188 mm |
| Weight | 80 kg | 17 kg | +63 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is Funmat Pro 310 APOLLO better than Q1 Pro?
- Build volume20.6 L vs 14.4 L+43%
- Max nozzle temperature450 °C vs 350 °C+29%
- Number of supported materials37 vs 113.4×
- Max bed temperature160 °C vs 120 °C+33%
- Build height (Z)260 mm vs 240 mm+8%
- Max chamber temperature100 °C vs 60 °C+67%
- Screen size7″ vs 4.3″+63%
- Build width (X)305 mm vs 245 mm+24%
- Build depth (Y)260 mm vs 245 mm+6%
Why is Q1 Pro better than Funmat Pro 310 APOLLO?
- Max acceleration8,000 mm/s² vs 20,000 mm/s²2.5×
- Max print speed500 mm/s vs 600 mm/s+20%
- Weight80 kg vs 17 kg4.7×
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | CoreXY / XY-head |
| Delivered as | Fully assembled | — |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 305 mm | 245 mm |
| Build depth (Y) | 260 mm | 245 mm |
| Build height (Z) | 260 mm | 240 mm |
| Build volume | 20.6 L | 14.4 L |
| Speed | ||
| Max print speed | 500 mm/s | 600 mm/s |
| Max acceleration | 8,000 mm/s² | 20,000 mm/s² |
| Print quality | ||
| Finest layer height | 0.1 mm | — |
| Thickest layer height | 0.3 mm | — |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | Yes | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | 450 °C | 350 °C |
| Default nozzle | 0.4 mm | — |
| Nozzle material | — | hardened steel |
| Nozzles | 2 | — |
| Filament diameter | 1.75 mm | 1.75 mm |
| Filament cutter | — | Yes |
| Supported materials | PEEK, PEEK-CF, PEEK-GF, PEKK, SP5000, AM200, ABS+, ABS-GF, ABS-HS, ASA, HIPS, PA12-CF, PA6, 66, PA6-CF, PC, PC-ABS, PC-FR, PC-PBT, PET-CF, PETG, PET-GF, PLA, PPA-CF, PPA-GF, PPS, PPS-CF, PPS-GF, PVA, SP3030, SP3050, SP5010, TPU95A, KIMYA ABS-ESD, BASF PC, ABS-FR, WANHUA PA12 | PLA, ABS, ASA, PETG, TPU, PVA, HIPS, PC, PA, Carbon, etc. |
| Number of supported materials | 37 | 11 |
| Engineering materials (PA, PC, CF) | Yes | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 160 °C | 120 °C |
| Enclosure | ||
| Actively heated chamber | Yes | Yes |
| Max chamber temperature | 100 °C | 60 °C |
| Air filter (carbon / HEPA) | Yes | — |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | Yes |
| USB | Yes | Yes |
| Screen size | 7″ | 4.3″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 700 mm | 477 mm |
| Depth | 655 mm | 467 mm |
| Height | 700 mm | 489 mm |
| Weight | 80 kg | 17 kg |
| Rated power | 1,800 W | 350 W |
