- scrc.us.com
- Compare
- Creator 4-A HT vs MD-400D
Flashforge Creator 4-A HT vs Mingda MD-400D
What Creator 4-A HT does better (3) and where MD-400D wins (1) — every spec side by side.
vs
5.6Build volume5.0
Dimensions
Size comparison
Creator 4-A HTMD-400D
| Creator 4-A HT | MD-400D | Difference | |
|---|---|---|---|
| Height | 1,050 mm | 911 mm | +139 mm |
| Width | 840 mm | 758 mm | +82 mm |
| Depth | 675 mm | 660 mm | +15 mm |
Drawn to the same scale from the official dimensions (front and side).
Why is Creator 4-A HT better than MD-400D?
- Build volume70 L vs 64 L+9%
- Build height (Z)500 mm vs 400 mm+25%
- EthernetYes · MD-400D: No
Why is MD-400D better than Creator 4-A HT?
- Build depth (Y)350 mm vs 400 mm+14%
Specifications
Side by side
| General | ||
| Technology | — | FDM / FFF (filament) |
| Klipper firmware | — | Yes |
| Build volume | ||
| Build width (X) | 400 mm | 400 mm |
| Build depth (Y) | 350 mm | 400 mm |
| Build height (Z) | 500 mm | 400 mm |
| Build volume | 70 L | 64 L |
| Speed | ||
| Max print speed | — | 300 mm/s |
| Max acceleration | — | 10,000 mm/s² |
| Max volumetric flow | — | 40 mm³/s |
| Print quality | ||
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | — | 350 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | — | 0.4 mm |
| Filament diameter | 1.75 mm | — |
| Print bed | ||
| Heated bed | — | Yes |
| Max bed temperature | — | 110 °C |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | No |
| USB | Yes | Yes |
| SD card | No | No |
| Bluetooth | No | No |
| Screen size | — | 7″ |
| Touchscreen | — | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 840 mm | 758 mm |
| Depth | 675 mm | 660 mm |
| Height | 1,050 mm | 911 mm |
| Weight | 90 kg | — |
| Rated power | — | 800 W |
