- scrc.us.com
- Compare
- CR-10 SE vs T1
Creality CR-10 SE vs FLSUN T1
What CR-10 SE does better (1) and where T1 wins (8) — every spec side by side.
Dimensions
Size comparison
CR-10 SET1
| CR-10 SE | T1 | Difference | |
|---|---|---|---|
| Height | 625 mm | 836 mm | −211 mm |
| Width | 490 mm | 436 mm | +54 mm |
| Depth | 470 mm | 490 mm | −20 mm |
| Weight | 12 kg | 16.8 kg | −4.8 kg |
Drawn to the same scale from the official dimensions (front and side).
Why is CR-10 SE better than T1?
- Weight12 kg vs 16.8 kg+40%
Why is T1 better than CR-10 SE?
- Build volume12.8 L vs 17.5 L+37%
- Max print speed600 mm/s vs 1,000 mm/s+67%
- Engineering materials (PA, PC, CF)No · CR-10 SE: Yes
- Enclosed build chamberNo · CR-10 SE: Yes
- Build height (Z)265 mm vs 330 mm+25%
- Number of supported materials6 vs 9+50%
- Build width (X)220 mm vs 260 mm+18%
- Build depth (Y)220 mm vs 260 mm+18%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Motion system | — | Delta |
| Delivered as | — | Partially assembled |
| All-metal frame | — | Yes |
| Build volume | ||
| Build width (X) | 220 mm | 260 mm |
| Build depth (Y) | 220 mm | 260 mm |
| Build height (Z) | 265 mm | 330 mm |
| Build volume | 12.8 L | 17.5 L |
| Speed | ||
| Max print speed | 600 mm/s | 1,000 mm/s |
| Print quality | ||
| Finest layer height | — | 0.1 mm |
| Thickest layer height | — | 0.35 mm |
| Vibration compensation (input shaping) | — | Yes |
| Automatic bed levelling | — | Yes |
| Extruder & hotend | ||
| Max nozzle temperature | — | 300 °C |
| Direct-drive extruder | — | Yes |
| Default nozzle | 0.4 mm | 0.4 mm |
| Nozzle material | — | brass |
| Swappable nozzle / hotend | — | Yes |
| Toolheads | 1 | 1 |
| Nozzles | 1 | 1 |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | ABS, ASA, PETG, PLA, TPU, Wood | ABS, ASA, PA, PC, PETG, PLA, PVA, TPU, Wood |
| Number of supported materials | 6 | 9 |
| Engineering materials (PA, PC, CF) | No | Yes |
| Print bed | ||
| Heated bed | Yes | Yes |
| Max bed temperature | 110 °C | 110 °C |
| Flexible magnetic build plate | — | Yes |
| Enclosure | ||
| Enclosed build chamber | No | Yes |
| Air filter (carbon / HEPA) | — | Yes |
| Chamber light | — | Yes |
| Connectivity & control | ||
| Connectivity | Wi-Fi, Ethernet, USB | Wi-Fi, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | Yes | — |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Screen size | — | 4.3″ |
| Touchscreen | Yes | Yes |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Silent stepper drivers | — | Yes |
| Built-in filament drying | — | Yes |
| Size & power | ||
| Width | 490 mm | 436 mm |
| Depth | 470 mm | 490 mm |
| Height | 625 mm | 836 mm |
| Weight | 12 kg | 16.8 kg |
| Rated power | 350 W | 450 W |
