- scrc.us.com
- Compare
- REX II WLAN vs Guider 2s
Bresser REX II WLAN vs Flashforge Guider 2s
What REX II WLAN does better (2) and where Guider 2s wins (2) — every spec side by side.
vs
3.9Speed3.1
7.9Build volume7.9
Dimensions
Size comparison
REX II WLANGuider 2s
| REX II WLAN | Guider 2s | Difference | |
|---|---|---|---|
| Height | 560 mm | 560 mm | = |
| Width | 550 mm | 550 mm | = |
| Depth | 490 mm | 490 mm | = |
Drawn to the same scale from the official dimensions (front and side).
Why is REX II WLAN better than Guider 2s?
- Max print speed150 mm/s vs 100 mm/s+50%
- Build depth (Y)280 mm vs 250 mm+12%
Why is Guider 2s better than REX II WLAN?
- EthernetNo · REX II WLAN: Yes
- Build width (X)250 mm vs 280 mm+12%
Specifications
Side by side
| General | ||
| Technology | FDM / FFF (filament) | FDM / FFF (filament) |
| Delivered as | — | Fully assembled |
| Build volume | ||
| Build width (X) | 250 mm | 280 mm |
| Build depth (Y) | 280 mm | 250 mm |
| Build height (Z) | 300 mm | 300 mm |
| Build volume | 21 L | 21 L |
| Speed | ||
| Max print speed | 150 mm/s | 100 mm/s |
| Print quality | ||
| Finest layer height | — | 0.1 mm |
| Thickest layer height | — | 0.4 mm |
| Extruder & hotend | ||
| Max nozzle temperature | — | 300 °C |
| Default nozzle | 0.4 mm | 0.4 mm |
| Filament diameter | 1.75 mm | 1.75 mm |
| Supported materials | PLA, ABS | — |
| Number of supported materials | 2 | — |
| Engineering materials (PA, PC, CF) | No | — |
| Print bed | ||
| Heated bed | — | Yes |
| Max bed temperature | — | 120 °C |
| Connectivity & control | ||
| Connectivity | Wi-Fi, USB | Wi-Fi, Ethernet, USB |
| Wi-Fi | Yes | Yes |
| Ethernet | No | Yes |
| USB | Yes | Yes |
| SD card | No | — |
| Bluetooth | No | — |
| Touchscreen | Yes | — |
| Features | ||
| Built-in camera | — | Yes |
| Filament runout sensor | — | Yes |
| Power-loss recovery | — | Yes |
| Size & power | ||
| Width | 550 mm | 550 mm |
| Depth | 490 mm | 490 mm |
| Height | 560 mm | 560 mm |
| Weight | — | 30 kg |
